Creep Setting for Magazine
Specify the creep binding margin width.
The default setting is 5 mm (Metric version) / 0.2" (Inch version).
Erase Border Width
Specify the width of the erased border margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1" boundary margin around all four
edges of each original.
The default setting is On.
Erase Center Width
Specify the width of the erased center margins with this function.
The default setting is 10 mm (Metric version) / 0.4" (Inch version).
Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select Front Cover mode.
The default setting is Combine.
Copy Order in Combine
You can set the copy order in Combine mode to Left to Right or Top to Bottom.
To Next Page
Loading...
