10. Press [Exit].
11. Press the [User Tools/Counter] key.
• To change the name, key display and title, see "Changing a Registered Name".
• p.250 "Changing a Registered Name"
Using the e-mail address as the sender
This section describes how to use the e-mail address as a sender.
1. Press [Protection].
2. Press [Sender] under "Use Name as".
Deleting an E-mail Destination
This section describes how to delete an e-mail destination.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Address Book Management].
4. Check that [Program / Change] is selected.
5. Select the name whose e-mail address you want to delete.
Press the name key, or enter the registered number using the number keys. You can search by the
registered name, fax number, folder name, e-mail address, or IP-Fax destination.
6. Press [E-mail].
7. Press [Change] under "E-mail Address".
8. Press [Delete All], and then press [OK].
7. Registering Addresses and Users for Facsimile/Scanner Functions
280
To Next Page
Loading...
Need help?
General
