10. Enter a password, and then press [OK].
If you make a mistake, press [Clear] or the [Clear/Stop] key before pressing [OK], and then try again.
11. Re-enter the password, and then press [OK].
If you make a mistake, press [Clear] or the [Clear/Stop] key before pressing [OK], and then try again.
12. Press [OK].
13. Press [Exit].
14. Press the [User Tools/Counter] key.
• You can edit boxes in the same way you program them. However, boxes that are being used cannot
be edited.
• p.185 "Parameter Settings"
Deleting Information Boxes
This section describes how to delete Information Boxes.
• If there are documents in the box, you cannot delete the box.
1. Press [Facsimile Features].
2. Press [General Settings].
3. Press [Box Setting].
Box Settings
215
To Next Page
Loading...
