4. Press [Delete], and then select the box you want to delete.
5. If the password is programmed, enter a password using the number keys, and then press
[OK].
If you make a mistake, press [Clear] or the [Clear/Stop] key, and then try again.
6. Press [Delete].
To cancel deleting a Transfer Box, press [Do not Delete]. The display returns to that of step 4.
7. Press [Exit].
8. Press the [User Tools/Counter] key.
Printing the Box List
This section describes how to print the Box List.
Print a list showing the currently programmed Personal Boxes, Information Boxes, and Transfer Boxes.
1. Press [Facsimile Features].
2. Press [General Settings].
3. Press [Box Setting: Print List].
4. Press the [Start] key.
After printing the list, you can then start from step 3.
To cancel printing a list before pressing the [Start] key, press [Cancel] or the [Clear/Stop] key. The
display returns to that of step 3.
To cancel printing a list after pressing the [Start] key, press [Stop Printing]. The display returns to that
of step 3.
5. Press the [User Tools/Counter] key.
Box Settings
221
To Next Page
Loading...
Need help?
General
