6. Press [Protection].
7. Press [Destination] or [Sender] under "Use Name as".
Both [Destination] and [Sender] can be selected at the same time.
8. Press [Change] under "Protection Code".
9. Enter a protection code using the number keys, and then press the [ ] key.
10. Press [OK].
11. Press [Exit].
12. Press the [User Tools/Counter] key.
• Specify a protection code of up to eight digits. You can also specify "Protection" without specifying a
protection code.
Registering a Protection Code to a Group User
This section describes how to register a Protection Code to a Group User.
Registering a Protection Code
311
To Next Page
Loading...
