Copier/Document Server Features on Main and
Sub-machines
This section explains the Copier/Document Server Features on the two machines during Connect Copy.
While connect copy is under way, the [User Tools/Counter] keys of the sub-machines remain disabled.
To change the default settings, first press [Connect Copy], which is highlighted on main machine's control
screen, then clear the connect copy job, and then make the required changes.
General Features
The following list describes how the default General Features settings on the main and sub-machines will
be applied during connect copy.
Auto Image Density Priority
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Original Type Priority
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Original Photo Type Priority
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Original Type Display
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Paper Display
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Original Orientation in Duplex Mode
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Copy Orientation in Duplex Mode
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
Max. Copy Quantity
• The main machine applies the setting that has been made on it. Sub-machine settings do not
affect connect copy.
3. Copier/Document Server Features
142
To Next Page
Loading...
