Ricoh Aficio MP C7500 - Memory Lock Per Sender; Paper Tray Per Sender; Programming Initial Set up of a Special Sender

Specify when programming a Special Sender.
1. Press [Print 2 Sided per Sender].
2. Press [On] or [Off], and then press [OK].
• Selecting [Same as Basic Settings] will result in the same setting made for "2 Sided Print" of "Reception
Settings".
Memory Lock per Sender
This section describes how to specify Memory Lock.
Specify when programming a Special Sender.
1. Press [Memory Lock RX per Sender].
2. Press [On] or [Off], and then press [OK].
• Selecting [Same as Basic Settings] will result in the same setting made for "Program Memory Lock ID"
under "Initial Settings".
Paper Tray per Sender
This section describes how to specify Paper Tray.
Specify when programming a Special Sender.
1. Press [Paper Tray per Sender].
2. Select the tray you want to use, and then press [OK].
• Selecting [Same as Basic Settings] will result in the same setting made for "Paper Tray" of "Reception
Settings".
Programming Initial Set Up of a Special Sender
This section describes how to program Initial Set Up of a Special Sender.
Program the "Initial Set Up" of a Special Sender. You can also specify the Bypass Tray Paper Size.
1. Press [Facsimile Features].
2. Press [Reception Settings].
4. Facsimile Features
204
4