3. Press [Program Special Sender].
4. Press [Initial Set Up].
5. Select the function you want to program.
6. To program Authorized Reception and Special Reception Function, press [Authorized
Reception] or [Special Reception Function].
7. Press [On] or [Off], and then press [OK].
The illustration shows the "Authorized Reception" display as an example.
8. To program Bypass Tray Paper Size, press [Bypass Tray Paper Size].
You can select a size from [Auto Detect], [Regular Size], or [Custom Size].
If you select [Auto Detect], proceed to steps 9 and 14.
If you select [Regular Size], proceed to steps 9, 10 and 14.
Special Senders to Treat Differently
205
To Next Page
Loading...
