6. Press [Auth. Info].
7. Press [Change] to delete the user code, and then press the [ ] key.
8. Press [OK].
9. Press [Exit].
10. Press the [User Tools/Counter] key.
• To delete a name from the Address Book entirely, see "Deleting a Registered Name".
• p.251 "Deleting a Registered Name"
Displaying the Counter for Each User
This section describes how to display the counter for each user.
1. Press [System Settings].
2. Press [Administrator Tools].
3. Press [Display / Clear / Print Counter per User].
Authentication Information
257
To Next Page
Loading...
