1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [SIP Settings].
4. Press [Change] for each property.
A proxy server relays call requests and responses.
A redirect server processes request destination inquiries.
A register server registers location information of user agents (which correspond to telephones
or facsimiles on public telephone lines) on an IP network.
5. Enter the IPv4 address or host name, and SIP user name, and then press [OK].
6. Specify whether to perform SIP digest authentication.
If you select [On], enter the password using up to 128 characters.
7. Press [OK].
8. Press the [User Tools/Counter] key.
Program / Change / Delete Gateway
Register, change, or delete the gateway used for transmission to IP-Fax.
• Program / Change
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Program / Change / Delete Gateway].
4. Check that [Program / Change] is selected.
5. Press a gateway to register.
When registering a new gateway, press [Not Programmed].
6. Press [Change] for "Prefix".
7. Enter the Prefix using the number keys, and then press [OK].
To change the existing prefix, press [Clear], and then enter a new prefix.
4. Facsimile Features
166
To Next Page
Loading...
Need help?
General
