11. Enter a password, and then press [OK].
If you make a mistake, press [Clear] or the [Clear/Stop] key before pressing [OK], and then try again.
12. Re-enter the password, and then press [OK].
If you make a mistake, press [Clear] or the [Clear/Stop] key before pressing [OK], and then try again.
To change the password after pressing [OK], press [Change] and repeat step 11 and 12, or press
[Cancel] and repeat from step 10.
13. Press [OK].
14. Press [Receiver].
15. Select a destination using the destination list, and then press [OK].
Press the key on the left of the display to switch the destination between fax number, e-mail address,
Internet Fax destination, and folder destination.
IP-Fax destination appears in the fax destination list.
16. Press [Security].
If not specifying the security function, proceed to step 18.
Security is set to use S/MIME authentication. For details about the security settings, consult your
administrator.
4. Facsimile Features
210
To Next Page
Loading...
