To change a box already programmed, press it, and then proceed to step 8.
6. Press [Transfer Box].
7. Enter a Box name, and then press [OK].
8. Enter a SUB Code.
To change the SUB Code, press [Clear] or the [Clear/Stop] key, and then try again. To change Box
name, press [Box Name], and then repeat from step 7.
9. To Program End Receivers, select a Receiving Station.
You can store five Receiving Station.
10. Specify End Receivers with Destination keys, and then press [OK].
Press the key on the left of the display to switch the destination between fax number, e-mail address,
Internet Fax destination, and folder destination.
4. Facsimile Features
218
To Next Page
Loading...
