Ricoh Aficio MP C7500 - Page 269

1. Press [Select Line].
2. Select the line, and then press [OK].
To program the SUB Code
This section describes how to program the SUB Code.
1. Press [Adv. Features], and then press [SUB Code].
2. Press [Change] under "TX SUB Code".
3. Enter the new SUB Code, and then press [OK].
4. To change the password, press [Change] under "Password (SID)".
5. Enter the new password, and then press [OK].
6. Press [OK].
To program the SEP Code
This section describes how to program the SEP Code.
1. Press [Adv. Features], and then press [SEP Code].
2. Press [Change] under "RX SEP Code".
3. Enter the new SEP Code, and then press [OK].
4. To change the password, press [Change] under "Password (PWD)".
5. Enter the new password, and then press [OK].
6. Press [OK].
To set the International TX Mode
This section describes how to set the International TX Mode.
1. Press [Change] under "International TX Mode".
Fax Destination
267
7