7. Press [Select Line], and then select [H.323] or [SIP].
8. Press [Change] under "Fax Destination".
9. Enter the IP-Fax destination.
10. Press [OK].
11. Press [OK].
12. Press [Exit].
13. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• p.249 "Registering Names"
• p.253 "Registering a User Code"
• p.300 "Registering Names to a Group"
• p.273 "Using the IP-Fax Destination as the sender"
• p.273 "To change the IP-Fax Destination"
• p.273 "To change the protocol"
• p.273 "To program the SUB Code"
• p.274 "To program the SEP Code"
• p.274 "To set the International TX Mode"
• p.274 "To select the fax header"
Changing a Registered IP-Fax Destination
This section describes how to change an IP-Fax Destination.
Fax Destination
271
To Next Page
Loading...
