SP5xxx: Mode
SM 5-107 D017/D018/D019/D020
Service
Tables
[0 to 1/1/0]
0: Not used (manual setting)
1: Used
21 Active IPv4 Address
This SP allows you to confirm the IPv4 address that was used when the
machine started up with DHCP. For example, if the the setting of the the IPv4
address is "0C0A80001h " this is displayed as "192.169.000.001".
22 Active IPv4 Subnet Mask
This SP allows you to confirm the IPv4 subnet mask setting that was used
when the machine started up with DHCP. For example, if the setting for the
IPv4 subnet mask is "FFFFFF00H" this is displayed as "255.255.255.000"
23 Active IPv4 Gateway Address
This SP allows you to confirm the IPv4 default gateway setting that was used
when the machine started up with DHCP. For example, if the setting for the
IPv4 gateway is "0C0A80001h" this is displayed as "192.168.000.001".
50 1284 Compatibility (Centro)
Enables and disables bi-directional communication on the parallel connection
between the machine and a computer.
[0 to 1/1]
0:Off
1: On
52 ECP (Centro)
Disables and enables the ECP feature (1284 Mode) for data transfer.
[0 to 1/1]
0: Disabled
1: Enabled
65 Job Spooling
Switches job spooling on and off.
0: No spooling, 1: Spooling enabled
To Next Page
Loading...
