SP5xxx: Mode
SM 5-117 D017/D018/D019/D020
Service
Tables
number recognized as the BCD.
Delivery Server Setting
5845
These are delivery server settings.
FTP Port No.
1
[0 to 65535/1]
IP Address (Primary)
2
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be used with the initial system setting.
[0 to FFFFFFFF/1]
Delivery Error Display Time
6
Use this setting to set the length of time that the message is shown when a
test error occurs during document transfer with the NetFile application and an
external device.
[0 to 999/1]
IP Address (Secondary)
8
Sets the IP address that is given to the computer that is the secondary
delivery server for Scan Router. This SP lets you set only the IP address, and
does not refer to the DNS setting.
Delivery Server Model
9
Lets you change the model of the delivery server that is registered by the I/O
device.
[0 to 4/1]
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
10 Delivery Svr. Capability
To Next Page
Loading...
