SP5xxx: Mode
D017/D018/D019/D020 5-128 SM
On/Off (1:ON 0:OFF)
1
Switches on the debug log feature. The debug log cannot be captured until
this feature is switched on.
[0 to 1/1]
0: OFF
1: ON
Target (2: HDD 3: SD)
2
Selects the destination where the debugging information generated by the
event selected by SP5858 will be stored if an error is generated
[2 to 3 /1]
2: HDD
3: SD Card
Save to HDD
5
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
6
Specifies the decimal key number of the log to be written to the SD Card.
Copy HDD to SD Card (Latest 4 MB)
9
Takes the most recent 4 MB of the log written to the hard disk and copies
them to the SD Card.
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card.
Copy HDD to SD Card Latest 4 MB Any Key)
10
Takes the log of the specified key from the log on the hard disk and copies it
to the SD Card.
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card. This SP does not execute if there is
no log on the HDD with no key specified.
To Next Page
Loading...
