Installing the Optional Paper Feed Unit
23
2
Installing the Optional Paper Feed Unit
This section describes how to install the optional paper feed unit.
WARNING:
CAUTION:
Important
❒ Tray 1 is required to print using the optional paper feed unit. Without Tray 1,
paper jams will occur.
❒ Certain options might not be available in some countries. For details, contact
your local dealer.
❒ Do not grip the tray areas when moving the printer.
A Check the package contains the paper feed unit.
B Turn off the power, and then unplug the printer's power cord from the wall
outlet.
• Touching the prongs of the power cable's plug with anything metallic
constitutes a fire and electric shock hazard.
• The printer weighs approximately 12 kg (26.4 lb.). When moving the printer,
use the inset grips on both sides, and lift slowly in pairs. The printer will
break or cause injury if dropped.
• Lifting the paper feed unit carelessly or dropping may cause injury.
• It is dangerous to handle the plug with wet hands. Doing this may result in
receiving an electric shock.
• Before moving the printer, unplug the power cord from the wall outlet. If the
cord is unplugged abruptly, it could become damaged. Damaged plugs or
cords can cause an electrical or fire hazard.
BXG206
To Next Page
Loading...
Need help?
General
