Cleaning the Printer
66
6
Cleaning the Friction Pad and the Paper
Feed Roller
If the friction pad or paper feed roller is dirty, a multi-feed or misfeed might occur.
In this case, clean the friction pad and paper feed roller as follows:
CAUTION:
Important
❒ Do not use chemical cleaner or organic solvent such as thinner or benzine.
A Turn off the power.
B Unplug the power cord from the wall outlet. Remove all the cables from the
printer.
C Carefully pull Tray 1, and then pull out with both hands.
Place the tray on a flat surface. If there is paper in the tray, remove it.
D Wipe the friction pads with a damp cloth.
• Unplug the power cord from the wall outlet before you move the machine.
While moving the machine, you should take care that the power cord will
not be damaged under the machine.
BXG031
BSP137S
To Next Page
Loading...
