Cleaning the Friction Pad and the Paper Feed Roller
67
6
E Wipe the rubber part of the roller with a soft damp cloth. After that, wipe
it with a dry cloth to remove the moisture.
F Reload the removed paper into the tray, and then push the tray carefully
into the printer until it clicks into place.
G Insert the plug of the power cord into the wall socket securely. Connect all
the interface cables that were removed.
H Turn on the power.
Note
❒ If jams or multi-sheet feeds occur after cleaning the friction pad, contact
your sales or service representative.
❒ If the optional tray 2 is installed, clean its friction pads and paper feed roller
in the same way as you did for tray 1.
BXG064
BXG040
To Next Page
Loading...
