85
8. Removing Misfed Paper
When Paper is Jammed
If a paper jam occurs, the Alert indicator on the control panel flashes and the fol-
lowing message appears on the Smart Organizing Monitor dialog box:
“
Paper Misfeed.”
Open the indicated cover or pull out the indicated unit, and then remove any
misfed paper.
Important
❒ Misfed paper may be covered in toner. Be careful not to get toner on your
hands or clothes.
❒ Toner on prints made after removing misfed paper may be loose (inadequate-
ly fused). Make a few test prints until smudges no longer appear.
❒ Do not forcefully remove misfed paper, it will tear. Torn pieces remaining
inside the printer will cause further misfeeds and possibly damage the
printer.
❒ Paper jams can cause pages to be lost. Check your print job for missing pages
and reprint any pages that did not print out.
Removing Jammed Paper from the Inner/Tray 1/Tray 2
Use the following procedure to remove paper that has become jammed inside
the printer or in the paper feed area.
CAUTION:
A Pull tray 1 halfway out, and check for jammed paper. If there is jammed
paper, remove it carefully.
B Carefully slide tray 1 back in until it stops.
• The inside of this machine becomes very hot. Do not touch parts labelled
“v” (indicating a hot surface).
BXG073
To Next Page
Loading...
Need help?
General
