Printer Does Not Print
75
7
Printer Does Not Print
If printing still does not start, contact your sales or service representative. Con-
sult with the store where the printer was purchased for information about the
location of sales or service representatives.
Possible Cause Solutions
Is the power on? Confirm that the cable is securely plugged into the power outlet
and the printer.
Turn the power on.
Does the Alert indicator
stay red?
If so, check the error message on the Smart Organizing Monitor
dialog box and take the required action.
Is paper loaded? Load paper into the paper tray or the bypass tray.
See p.41 “Loading Paper”.
Can you print a configura-
tion page?
If you cannot print a configuration page, it probably indicates a
printer malfunction. Contact your sales or service representative.
See Software Guide.
Is the interface cable con-
nected securely to the
printer and the computer?
Connect the interface cable securely. If it has a fastener, fasten it
securely as well.
Are you using the correct
interface cable?
The type of interface cable you should use depends on the compu-
ter you use. Be sure to use the correct one.
If the cable is damaged or worn, replace it with a new one.
See p.99 “Specifications”.
Is the Ready indicator
blinking or lit after starting
the print job?
If not blinking or lit, the data is not being sent to the printer.
❖ If the printer is connected to the computer using the in-
terface cable
Check the port connection setting is correct. For details about
checking the port connection, see p.76 “When the Printer is Di-
rectly Connected to a Computer via USB Cable”.
❖ Network Connection
Contact your network administrator.
To Next Page
Loading...
Need help?
General
