Installing the Optional Paper Feed Unit
25
2
Note
❒ When moving the printer, remove the optional paper feed unit.
❒ After installing the optional paper feed unit, select tray 2 in the printer
driver. For details, see the printer driver Help.
❒ If the optional paper feed unit is not installed properly, reinstall it follow-
ing this procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
Reference
For loading paper into the paper tray, see p.41 “Loading Paper”.
For printing the configuration page, see Software Guide.
When adjusting the printing position, see Software Guide.
To Next Page
Loading...
