Troubleshooting
78
7
Mac OS X
When the printer is connected to Mac OS X and the Ready indicator does not
flash or light up, try the following procedures to check the port connection.
•Use [About This Mac] to check the USB information.
• Use the printer browser to check if the printer is displayed.
Using [About This Mac]
A Click Apple Menu, and then select [About This Mac].
B Click [More Info].
C Under [Contents], for [Hardware], select [USB].
Using the printer browser
A In the menu bar, click [Go], select [Application], and then select [Utilities].
B Double click [Printer Setup Utility].
C Click [Add].
The printer browser starts.
Confirm the printer is displayed on the browser. If it is not, reinstall the driver.
To Next Page
Loading...
