• When removing jammed paper or replacing toner, avoid getting toner (new or used) on your skin.
If toner comes into contact with your skin, wash the affected area thoroughly with soap and water.
• Be careful not to trap your fingers when opening or closing the top cover.
• Actual printable numbers vary depending on image volume and density, number of pages printed at
a time, paper type and size, and environmental conditions such as temperature and humidity. Toner
quality degrades over time. Early replacement of the print cartridge might be necessary. Therefore,
we recommend you always keep a new print cartridge ready.
• The print cartridge might need to be replaced even if there is toner remaining in it. This is due to
depletion or wear of other components.
• Do not allow paper clips, staples, or other small metallic objects to fall inside the printer.
• Do not expose the print cartridge without its cover to direct sunlight for a long time.
• When removing print cartridge, be careful not to drop it.
• Store print cartridges in a cool dark place.
• If print cartridge are not changed when necessary, printing will become impossible. We recommend
keeping a stock of print cartridge.
• Print cartridge (consumables) are not covered by warranty. However, if there is problem, contact the
store where they were purchased.
Replace the print cartridge if the following message appears on the display:
"Replcmnt Requrd: Print Cart"
While [Resume] is displayed, you can resume printing simply by pressing [Resume]. Approximately 50
pages can be printed (this number can vary depending on the environmental conditions). If prints appear
dirtied, replace the print cartridge.
• If cyan, magenta, or yellow toner runs out, you can print in black and white using black toner. Change
the color mode setting to [Black and White] using the printer driver.
• If black toner runs out, you cannot print in black and white or color until the black print cartridge is
replaced.
7. Maintaining the Printer
148
To Next Page
Loading...
Need help?
General
