• When lifting the machine, use the inset grips on both sides. The printer could break or cause an
injury if dropped.
• Removed tape is dirty. Be careful not to let it touch your hands or clothes.
• Do not grip on the tray area when lifting the printer.
• Do not allow paper clips, staples, or other small metallic objects to fall inside the printer.
• Keep the uncovered print cartridge away from direct sunlight.
• When you use this printer for the first time, use the four print cartridges supplied with the printer.
• Print cartridge (consumables) are not covered by warranty. However, if there is problem, contact the
store where they were purchased.
1. Remove the plastic bag.
2. Lift the printer with two people by using the inset grips on both sides of the printer.
Leave the tape holding the paper feed tray and cover in place while moving the printer. Lower the
machine slowly and carefully to prevent trapping your hands.
When moving the printer, do not hold on the following parts as doing so could cause a malfunction:
• The handle onto the standard paper feed tray.
• The underside of the bypass tray.
3. Remove the adhesive tape.
Unpacking
31
To Next Page
Loading...
Need help?
General
