Ricoh BE-C1 D046 - Page 103

9. Attach four mylars to the small tray as shown above.
10. Attach middle strut [1] to base strut ¬ ( x2, Nuts x2, Spacers x4).
11. Attach original strut [2] to the middle strut [1] ( x2, Nuts x2, Spacers x4).
12. Attach middle strut [3] to base strut ¯ ( x2).
13. Attach original strut [4] to the middle strut [3] ( x2, Nuts x2, Spacers x4).
Tray and Stacker Options
101
2