3. Do the adjustment:
For Adjust: Turn plate:
A Right side Right (cw)
B Right side Left (ccw)
• In the table above, "cw" means "clockwise", "ccw" means "counter-clockwise".
• The range of adjustment is ±1.5 mm within an arc of 90 degrees (±0.75 mm if rotated only 45
degrees.)
4. To determine the amount of adjustment, divide the amount of measured skew (mm) by 0.0166 mm.
Refer to the detailed instructions below.
Adjustment Plates
The photo above shows the right side (viewed from the front of the main machine).
• [A] is the adjustment plate.
2. Installation
142
To Next Page
Loading...
