• [B] is the notch (shown at the starting position).
Loosen the screw [C], change the position of the plate, then re-tighten the screw.
The dotted arrows show the range of adjustment up (cw) and down (ccw) (90 degrees). This adjustment
mechanism is the same on the left side of the machine.
Right Side Adjustment
[1] The plate has been rotated right (clockwise) 90 degrees.
[2] The plate has been rotated left (counter clockwise) 90 degrees.
Rotation To adjust for
90° 1.5 mm
67° 1.2 mm
45° 0.75 mm
Examples
Bridge Unit BU6500 (D407) Folder FD6500A (B889)
143
To Next Page
Loading...
