Ricoh BE-C1 D046 - Page 424

Up to 297 mm Less than ±3.5 mm Less than ±4.5 mm
298 to 594 mm Less than ±4.0 mm Less than ±5.0 mm
595 to 841 mm Less than ±4.5 mm Less than ±6.5 mm
842 to 1189 mm Less than ±6.0 mm Less than ±8.5 mm
1190 to 2500 mm Less than ±12 mm Less than ±17.5 mm
2501 to 3600 mm Less than ±17.5 mm Less than ±25.5 mm
3601 to 6000 mm Less than ±32 mm ---
6001 to 15000 mm Less than –32 to +200 mm ---
15001 to 30000 mm Less than –32 to +400 mm ---
4. If the measurements do not meet the standards (see the table below), adjust the following SP settings.
SP4961 001
Original Adjustment – Synchro Cut Adjustment 210 mm
Standard: 210 mm ±0.5 mm
SP4961 002
Original Adjustment – Synchro Cut Adjustment 1000 mm
Standard: 1000 mm ±1 mm
4. Replacement and Adjustment
422
4