Ricoh BE-C1 D046 - Page 554

Type Mode [Range/Default/Step °C]
1
Plain
1 [55 to 180/100/5°C]
2 2 [55 to 180/90/5°C]
3 3
[55 to 180/60/5°C]4 4
5 5
6
Trans.
1 [55 to 180/150/5°C]
7 2 [55 to 180/100/5°C]
8 3
[55 to 180/60/5°C]
9 4
10 5
11
Film
1
12 2
13 3
14 4
15 5
16 Plain: Low Temperature Mode [55 to 180/120/5°C]
1934
Lower Limit Temperature: Hot Roller
These settings set the values for minimum temperature, based on the type of paper used: Plain
Paper, Tracing Paper (Trans.), and Film. Each paper type has 5 modes, so a total of 15
calculations is done:
Target Type Mode [Range/Default/Step]
1
Hot Roller Plain
1 [0 to 50/20/5°C]
2 2 [0 to 50/15/5°C]
3 3 [0 to 50/25/5°C]
4 4
[0 to 50/20/5°C]
8. Appendix: SP Mode Tables
106
8