4750
CIS Output Mode Setting
This SP sets the CIS output mode.
[0 to 4/0/1]
0 : Normal output. Corrected black data output, corrected white data (shading data) output.
1: Black Correction
2: White Correction
3 : Test Pattern
4 : No Correction (raw data)
4751
CIS Test Pattern
This SP sets the mode for the CIS test pattern.
[0 to 4/0/1]
0 : Fixed pattern
1 : Main Scan Gradation Pattern (1 Grade/1 Pixel)
2 : Sub Scan Gradation Pattern (1 Grade/1 Line)
3 : 1-Bit Grid Pattern (128 pixel intervals)
4 : 1-Bit Grid Pattern-X (128 pixel intervals)
4753
CIS Test Pattern Setting: Fixed Data DFU
This SP displays and sets the fixed data when the RGB test pattern is done.
[0 to 2023/1023/1]
4820 Lamp Abnormal Detection
1 Counter Lamp 1
Displays the error counts for the Xe lamps that are used in the
CIS unit to scan originals.
[0 to 255/0/1]
2 Counter Lamp 2
3 Counter Lamp 3
4 Counter Lamp 4
5 Counter Clear
6 Lamp Error Flag Displays the error flags for lamps 1, 2, 3, 4.
8. Appendix: SP Mode Tables
146
To Next Page
Loading...
