Ricoh DD 4450 - 1 X SP Mode Table: SBU Error Location

SP Table
C279 6 SM Appendix
1-83
SBU hard error location display
This function shows where a SBU error has occurred.
 bit 7: 0 (not used)
 bit 6: 0 (not used)
 bit 5: GASBU-N Id error
 bit 4: VSP5100 reset error
 bit 3: GASBU-N reset error
 bit 2: Serial communication error
 bit 1: Power ON/reset clear error
 bit 0: Connect detection error
1-84
SBU adjust error location
display
This function shows where a SBU error has occurred.
 bit 7: 0 (not used)
 bit 6: 0 (not used)
 bit 5: Re error (Gain error)
 bit 4: Ro error (Gain error)
 bit 3: Ge error (Gain error)
 bit 2: Go error (Gain error)
 bit 1: Be error (Gain error)
 bit 0: Bo error (Gain error)