Ricoh DD 4450 - Step-by-Step Machine Installation

Machine Installation
C279 2-6 SM
2.3.2 INSTALLATION PROCEDURE
1. Unpack the box. When installing the optional table, mount the machine as shown (there are 2
screws [A] packed with the table).
 Only lift with the carrying handles on the bottom corners of the machine.
 Secure the machine on the table with the 2 screws [A] provided. This prevents the
machine from falling from the table when the platen cover is open.
 Lock the casters of the table as shown [B], to prevent the machine from moving (e.g.
when the drum is set).