Ricoh DD 4450 - 2 X SP Mode Table: Print Pressure and Speed Settings

SP Table
C279 12 SM Appendix
2-35
Print pressure fixing mode
[ON - OFF / ON / -]
This function is used to specify whether the print pressure point is set to
automatic or fixed.
 Auto: Decide on Sp6-70 to 87
 Fixed: Decide on SP2-36
SP2-37setting is not reflected.
2-36 Print pressure in fixing mode
[1 to 5 / 4 / 1]
When the print pressure point for SP2-35 is set to fixed, this field is used to
specify the value at which it is fixed.
2-37 Printing pressure adjust
[-2 to 2 / 0 / 1]
Changes the printing pressure of all printing speeds (60 to 130 rpm).
When you adjust printing pressure for each printing speed or temperature, use
SP6-70 to 87.
2-38 Ink idling roller setting
[0 to 2 / 1 / 1]
Ensures that the first print has sufficient ink density if the machine was not used
for a long time.
The idling roller motor turns to press the drum idling roller against the inner
surface of the drum screen.
 0: OFF
 1: The machine enters the drum idling mode after the master is ejected.
 2: The machine enters the drum idling mode after the master is made.
2-39
Paper delivery motor speed
[-55 to 55% / 0 / 1%]
Feeding 15rpm,30rpm,45rpm will only affect.
2-40
Idling after print
[ ON-OFF / ON / -]
Set whether to detect the idling after printing
 ON: To the idling(To press the idling roller)
 OFF: Don't idling(Not to press the idling roller)