Ricoh DD 4450 - 3 X SP Mode Table: Installation Date and Key Settings

SP Table
SM Appendix 19 C279
Appendix:
Service
Program
Mode Tables
3-4
Input installation date
[yy.mm.dd / 00.1.1 / -]
Input the installation date as shown below. Press the Enter (#) key between
each one.
1. Input the last two digits of the present year (two-digit number).
2. Input the present month (two-digit number).
3. Input the present date (two-digit number).
Example: 2003/January/27th/13:00:00
1. Input 03 then press Enter (#).
2. Input 01 then press Enter (#).
3. Input 27 then press OK
3-9 Key counter setting
[ YES - NO / NO / -]
Set whether connect the key counter.
3-10
Key card setting
[ YES - NO / NO / -]
Set whether connect the key card.