Overview
C279 1-6 SM
No. Component Function
28 Printing pressure motor Raises and lowers the pressure roller.
31 Ink Pump Motor Drives the ink pump.
45 Master Eject Motor Sends used masters into the master eject box.
46 Air Knife Fan Motor 1
Rotates the fan to provide air to separate the
leading edge of the paper from the drum.
47 Air Knife Fan Motor 2
48 Air knife fan motor 3
50 Vacuum Fan Motor
Provides suction so that paper is held firmly on the
transport belt.
40 Paper Delivery Motor Feeds out the printed paper.
53 Pressure Plate Motor Raises and lowers the pressure plate.
57 Main Motor Rotates the drum.
59 Registration Motor
Feeds the paper to align it with the master on the
drum.
61 Paper Feed Motor Feeds the paper from the paper table.
67 Clamper Motor Opens or closes the master clamper on the drum.
72 Duct plate motor
Opens or closes the duct plate at entrance of the
duct.
74 Cutter Motor Cuts the master.
79 Duct fan motors Provides suction to guide the master into the duct.
81 Master Feed Motor Feeds the master to the drum.
83 Thermal head driving motor Raises and lowers the thermal head.
84 Blower fan motor Provides air to separate the master.
91 Idling roller motor
Presses or releases the drum idling roller against
the drum screen.
96 Ink Pump Motor Drives the ink pump.
To Next Page
Loading...
