SP Table 
C279 46 SM Appendix 
8X SP Mode Tables 
8 
System test 
Program download test, Reproduction test pattern. 
8-1 
Download main firmware     
Download the program from the SD card into the machine. 
Start by pressing the "# "key. 
8-2  Download DF firmware     
  Download the program from the SD card into the machine. 
8-3 Report(LOG DATA/SC/JAM)     
8-4 Report(BASIC SETTING     
8-5 
Report(ADJUSTMENT 
VALUES) 
 
8-6 
Report(INPUT/OUTPUT 
TESTS) 
 
8-10 
Test patterns   
[ 1 to 9 / 6 / 1] 
Makes prints without using the scanner. 
Access SP8-10 and select the number "6", then press the "Enter(#)" key. 
Other numbers are as shown below, but do not use them except for number "6". 
1: Grid, 2: Vertical, 3: Horizontal gray, 4: Vertical gray, 5: 16 grays, 
6: Cross, 7: Diagonal grid, 8: 256 grays, 9: 64 grays