Platen Cover (D593)
C279 2-16 SM
4. Mount the platen cover [A] by aligning the screw keyholes over the stud screws.
5. Slide the platen cover toward the right of the machine.
6. Remove the platen sheet [B] from the platen cover [A].
7. Place the platen sheet on the exposure glass.
8. Slowly close the platen cover, gently pressing it against the platen sheet so that the sheet
sticks to the cover.
9. Open the platen cover again and lightly hold the Velcro part.
To Next Page
Loading...
