Ricoh DD 4450 - Page 59

Tape Dispenser (C651)
SM 2-25 C279
Installation
Procedure
9. Open the tape dispenser cover [A]. Then, insert the leading edge of the tape into the tape
entrance until it stops as shown in the illustration [B].
 Be sure that the tape is installed in the proper direction. If it is not, the tape marker
will not work correctly.
10. Turn on the main switch of the main body.
11. Turn on the tape dispenser switch [A].
12. Press the tape cut button [A] to cut off the leading edge of the tape.
13. Check the tape dispenser operation using the Memory/Class modes of the main body.