Sender Settings
89
2
Note
❒ You can confirm transmission results by using both the E-mail TX Result
function, which sends the results by e-mail, and the Communication Re-
sult Report printed by the machine. You can set whether to use both of
these together in User Parameters (switch 10, bit 6) in the Fax Features
menu.
❒ You can program one of the User Function keys with operations for Sender
Settings. User Function keys allow you to omit steps
B
and
C
.
❒ You can use Communication Result Report, etc. to check usage status by
specified users. If user authentication is set, you can check usage by
logged-in users. If User Code is set to sender, you can count the number of
uses by each user.
❒ To cancel the Sender Settings, cancel the transmission. See “Canceling a
Transmission”.
Reference
p.81 “Canceling a Transmission”
“System Settings”, General Settings Guide
“Fax Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gen-
eral Settings Guide
To Next Page
Loading...
