3. Troubleshooting
If Your Machine Does Not Operate As You
Want
When a Message Is Displayed
The following chart contains explanations for common messages. If other messages appear, follow the
instructions as they are displayed.
• For messages not listed here, see General Settings Guide.
Message Causes Solutions
"Cannot detect original size" Improper original is placed. See
page 31 "Sizes difficult to
detect".
Select paper manually, not with
the Auto Paper Select function,
and do not use the Auto
Reduce/Enlarge function.
Input the both horizontal and
vertical sizes of the non-
standard original.
Place the original on the
exposure glass. See page 33
"Placing Originals on the
Exposure Glass".
Original is not placed. Place your originals.
"Check original orientation." Original is not placed in the
proper orientation.
Change original orientation.
"Check paper size." Improper paper size is set. If you press the [Start] key, copy
will start onto the selected
paper.
"Rotate Sort is unavailable with
this paper size."
A size of paper for which Rotate
Sort is not available is selected.
Select a proper paper size. See
page 56 "Sort".
73
To Next Page
Loading...
Need help?
General
