If You Cannot Make Copies As You Want
This section explains causes and remedies when copy results are not as expected.
Basic
Problem Causes Solutions
You cannot combine several
functions.
Selected functions cannot be
used together.
Check the combination of
functions and make the settings
again.
• page 107 "Combination
Chart"
Edit
Problem Causes Solutions
When using the Duplex Margin
function, parts of the original
image are not copied.
You set a wide erased margin. Set a narrower margin with
User Tools. You can set the
width between 0–50 mm (0"–
2"). See page 94 "Duplex
Margin".
There is a lack of margin space
on the opposite side of the
binding position.
Combine
Problem Causes Solutions
When using Combine, parts of
the image are not copied.
You specified a reproduction
ratio that does not match the
sizes of your originals and copy
paper.
When you specify a
reproduction ratio using the
Manual Paper Select function,
make sure the ratio matches
your originals and the copy
paper.
• Select the correct
reproduction ratio before
using the Combine
function.
Your originals are not identical
in size and direction.
Use originals that are identical
in size and direction.
If You Cannot Make Copies As You Want
77