2. Copying
Basic Procedure
1. If the machine has user codes set, enter a user code (up to eight digits) using the number
keys, and then press the [OK] or [ ] key.
The machine is ready to copy.
• For user codes, see "Administrator Tools", General Settings Guide.
2. Make sure " Ready" appears on the display.
Initial copy display
If any other function is displayed, press the [Copy] key.
3. Make sure no previous settings remain.
• When there are previous settings remaining, press the [Reset] key.
4. Place your originals.
• page 33 "Placing Originals"
5. Make the necessary settings.
• See the explanations for each function.
6. Enter the number of copies using the number keys.
• The maximum copy quantity that can be set is 99.
43
To Next Page
Loading...
