4. Align the end fence gently against the paper you loaded.
5. Carefully slide the paper tray fully in.
• Various sizes of paper can be loaded in the paper trays by adjusting the positions of side fences
and end fence. For details, see "Changing the Paper Size", General Settings Guide.
Orientation-Fixed Paper or Two-Sided Paper
Orientation-fixed (top to bottom) or two-sided paper (for example, letterhead paper, prepunched
paper, or copied paper) might not print correctly, depending on how the originals and paper are
placed.
• page 95 "Letterhead Setting"
Settings for the User Tools
Select [On] in [Letterhead Setting] under [Copier Features] (User Tools), and then place the
original and paper as shown below. When printing with the printer function, placing orientation is
the same.
Original orientation and paper orientation
The meanings of the icons are as follows:
Icon Meaning
Place or load paper scanned or printed side face up.
3. Troubleshooting
82
To Next Page
Loading...
