Manual Paper Select
1. Select the paper tray or bypass tray using the [ ] or [ ] key.
The selected tray and the paper size appear.
• page 45 "Copying from the Bypass Tray"
Rotated copy
If the orientation in which your original is placed ( or ) is different from that of the paper you
are copying onto, this function rotates the original image by 90° to fit it on the copy paper. This
function works when [Auto Paper Select] or [Auto Reduce/ Enlarge] is selected.
• You cannot use the Rotated Copy function when enlarging onto A3, B4 JIS, 11" × 17", 8
1
/
2
"
× 13", or 8
1
/
2
" × 14" size paper. To do this, place your original in the orientation.
Original size and
orientation
Original size and
orientation
You cannot
rotate:
A4, B5 JIS, or
A5
When enlarging
to:
B4 JIS, A3
However, you
can use:
A4, B5 JIS, or
A5
When enlarging
to:
B4 JIS, A3
Preset Reduce/Enlarge
You can select a preset ratio for copying.
2. Copying
52