3. Select the orientation using the [ ] or [ ] key, and then press the [OK] key.
• You can select the orientation of originals and copying paper when [Always Specify] is
specified for [Orientation] under [Copier Features] (User Tools). See page 92 "Orientation".
If it was not specified for, proceed to step 4.
•
To change the copy orientation, select the icon which orientation of originals is used.
The "Programmed" message appears.
4. Select the paper size using the [
] or [ ] key.
5. Place your originals, and then press the [Start] key.
Two-Sided Combine
You can combine various pages of originals into one sheet with two sides.
1 Sided 4 Pages Combine 2 Side
Copies 4 one-sided originals onto one sheet with two pages per side.
1 Sided 8 Pages Combine 2 Side
Copies 8 one-sided originals onto one sheet with four pages per side.
Copier Functions
65
To Next Page
Loading...
