4. User Tools (Copier Features)
Accessing User Tools (Copier Features)
This section is for administrators in charge of this machine.
Administrators can change or make default settings.
• Be sure to quit User Tools and return to the initial copy display when all settings are complete. This
section describes system settings for the copier function.
• Selected settings are highlighted.
• Any changes made with User Tools remain in effect even if the main power switch or operation
switch is turned off, or the [Reset] key is pressed.
• For details, see "User Tools (System Settings)", General Settings Guide.
Changing Default Settings
• If an administrator code is set, the administrator code input display appears before you can
change the default settings. For details about access codes, see "Administrator Tools", General
Settings Guide.
1. Press the [User Tools/Counter] key.
89
To Next Page
Loading...
Need help?
General
