8. Lock the lever of the print cartridge.
9. Close the front cover.
• If "Print Cartridge is almost empty." appears on the system message widget, the toner has almost
run out. Have a replacement print cartridge at hand.
• If appears when there is a lot of toner, hold the cartridge with the opening upward, shake it
well, and then reinstall it.
• When "No Toner" appears on the system message widget, you can check the name of the required
toner and the replacement procedure using the [ Add Toner] screen. To display the [ Add
Toner] screen, press [Check Status], and then press [Check] in the [Mach. Status] area in the
[Mach./Applic. Stat] tab.
• For details about how to check contact number where you can order supplies, see "Inquiry",
Maintenance and Specifications.
Sending Faxes or Scanned Documents When Toner Has Run Out
When the machine has run out of toner, the indicator on the display lights. Note that even if there is no
toner left, you can still send faxes or scanned documents.
• If number of communications executed after the toner has run out and not listed in the automatically
output Journal exceeds 200, communication is not possible.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [Fax] icon or the [Scanner] icon.
3. Press [Exit], and then perform transmission operation.
The error message disappears.
• Any reports are not printed.
9. Adding Paper and Toner
160
To Next Page
Loading...
Need help?
General
Weight and Dimensions
