7. Adjust the paper guides to close any gaps.
Do not move paper loaded in the tray more than a few millimeters.
Moving the loaded paper excessively may cause damage to paper edges on the openings of the
tray's lifting plate, resulting in sheets being folded or becoming jammed.
8. Lift the front side of the tray, and then slide it into the machine carefully until it stops.
To avoid paper jams, make sure the tray is securely inserted.
• Letterhead paper must be loaded in a specific orientation. For details, see "Loading Orientation-
fixed Paper or Two-sided Paper", Paper Specifications and Adding Paper.
• You can load envelopes in Trays 2–5. When loading envelopes, place them in the correct
orientation. For details, see page 153 "Envelopes".
Loading Paper into the Bypass Tray
Use the bypass tray to use OHP transparencies, adhesive labels, and paper that cannot be loaded in
the paper trays.
9. Adding Paper and Toner
140
To Next Page
Loading...
Need help?
General
Weight and Dimensions
